Need Service?

Tank Hydros and Visuals conducted on-site.

Protect your scuba equipment investment with regular service. Clean it before storing it for the winter. Check it before packing it for a dive trip. Have a problem that only happens "down there"? We can test it in our 3,000 gallon tank.

SERVICE PRICE LIST

Air fills - Single fill $4

10 fill card for $35 =$3.50/fill...a good deal also available in 25 fill and 50 fill cards.

Cylinder VIP - $15

Eddy Current testing - $20 *see notice below*

Cylinder hydro testing - $24

Cylinder cleaning - $12

Valve rebuild - $30 + parts

Burst disk replacement - $10

Regulator inspect & clean - $40

Octopus inspect & clean - $20

Regulator service - $55 + parts

Octopus service - $25 + parts

BCD inspect & clean - $30 + parts

Wetsuit repair - Labor + materials

Drysuit repair - Labor + materials

Drysuit leak test - $20

Hole repair - $15 + $5/each additional hole

Wrist seals: latex $40 + seals neoprene $45 + seals

Neck seals: latex $40 + seals neoprene $45 + seals

Labor, other - $60/hour

Special notice Effective 1/1/2007 US DOT requires Eddy Current testing on all 6351 3AL cylinders. Luxfer aluminum cylinders made before 1989 were made of 6351 aluminum and subject to stress load cracking. If you own one of these cylinders be advised that many dive shops will no longer fill these tanks. The US DOT requires a special eddy current test when the tank is due for hydro-testing and many dive operators also require them annually. We will continue to service 6351 cylinders only if we conduct the Hydro testing and VIP. We make this requirement for our own safety. If a tank were to fail, it will likely occur during servicing.